Wiring LED Lights For DIY Miniature Dollhouses (Turn On Captions)

By | March 15, 2023

hey guys! today i’ll be showing you guys how to wire LED lights using an old miniature house that i did 5 years ago! materials (pause to see) use an x-acto knife to cut out the cable jacket GENTLY cut the outside of the cable jacket DO NOT CUT THROUGH THE WIRES gently turn and twist while cutting finish cutting all sides until the jacket is loose enough to pull out carefully remove the cable jacket repeat the same steps for the black wire batteries repeat the same steps for cutting out the cable jacket do that for all wires red wire goes with white wires black wire goes with gray wires test out the wires first to see if it works it worked 😀 twist the wires together remember that red goes with white and black goes with gray skip to 3:40 if you already know the steps repeat with all wires test it out again before taping tadaaa 😀 use tape to secure the wires together please excuse the background noise ? it’s my mini fan tape them all together and you’re done!

As found on YouTube