installing ikea kitchen on the cob LED
lighting for kitchen worktops the onslaught LED lighting comes in three
lengths 80 60 and 40 centimeters completed with an electronic LED power
supply with wireless receiver one power supply cord one intermediate connection
cord to connect several lights together with only one connection to the main
supply normally to use more than one leg power supply one remote control that
turns on or off all nighting units connected in a chain simultaneously in
this example for our lot LED lights totalizing 30.7 what's of output 1 power
supply of 30 watts is enough to use more LED lights is advisable to use more than
one power supply now let's start with DIY images starting
with the unboxing then taking measures and next with the installation itself so
keep watching and if you find this video helpful give a thumbs up and if you have
any question leave your comments below start by finding where you want to mount
the LED light yeah now go ahead and find the center of the
wall cabinet next cut the gutter accordingly to the same length then
stick it in the cabinet now go ahead and screw the LED light
support into the base of the kitchen wall cabinet measure the other side of
the cabinet and trace a line with a pencil you can do this for all cabinets
and one step if you prefer then position the LED light support and Mark the
holsters crew now a great tip is to make a hole within all it greatly helps the
screwing procedure now go ahead and attach the LED light
from the bottom of the wall cabinet start by passing the why behind the
cabinet until reaches the top of it if you do not find room to pass the wire
behind the cabinet you can always make a hole and pass the wire inside have the
same result yeah now position the light and press firmly
until you hear a click position the wire in the gutter and
follow this steps for all unlocked LED lights yeah yeah now with the power supply on top of the
cabinets we're going to connect all on love LED
lights in this setup i only need a power supply with 30 watts if the output total
of all lights exceeds this value for more than 23 wats i will need two or
more power supplies to connect two or more power supplies we need the inter
connection cable that i mentioned earlier and in the end of this video you
can watch how to connect two power supplies now with all light attached to
the power supply plug the power cord and next we going to pair the wireless
remote control with the power supply yeah yeah present this type of light spot on the
power supply and then press the button on the remote control until both LED
lights blink arrange the cables to stay hidden from view and it's done now
preparing food and doing kitchen workers safer easier and more fun with or even
light across your worktop to install more than one power supply it's needed
the and salute or intermediate connection cord connecting one to
another it's easy it's possible to divide various LED lights on both power
supplies and then simple connect both power
supplies with the intermediate connection cord attached the power
supply cord then pair both with the wireless remote control and you are
ready to enjoy your kitchen worktop with the on la bled lightning i hope this
video was useful to you if so give a thumbs up subscribe if you haven't
already and I see you in the next videos thanks for watching Cheers yeah
