[ad_1]
Dewalt’s latest miter saw, the DCS 781 Flex volt 12-inch miter saw, is more than just an upgrade from the older Flex volt model. It has become the top tier of what miter saws should be. The saw boasts an impressive dust collection system, which was put to the test with 300 cuts, and barely any sawdust fell on the user.
The power of the machine is spot on; it can handle anything that is thrown its way, and users don’t need multiple batteries to keep it going. However, the accuracy of the detents is also important. It was first tested at 45 degrees, and there was some wobbling, but the zero detent was spot on. With wood, tested with two lines drawn using a Square, both cutting the wood with the same edge, the measured angle was 90 degrees.
The saw is spot on at 15 degrees, with the measured angle being 75.1. At 22.5 degrees, it was measured at 67.5. At 31.6, it was measured at 58.4, and at 45 degrees, it was just a touch too big, so adjusting the bevel angle was necessary.
When a 90-degree cut was made to check the saw’s accuracy, the board is not perfectly straight. Still, the saw was measured to be accurate at 90 degrees and 90.1 degrees. Dewalt has taken into account that all walls are not perfect and adjusted their saws accordingly. The bevels, however, are adjustable, which is good news.
The only unknown variable is the effect of sawdust in the machine; it is unknown the long-term effect it might have on the saw. However, as of now, the machine is working accurately, handling everything thrown at it.
Overall, the Dewalt DCS 781 Flex volt 12-inch miter saw is a top-tier, accurate, and powerful saw. The minor issues that exist are minor and easily adjustable. In summary, the machine is production quality good and has proven to be reliable.
[ad_2]
Source link
