2 LED light bars are better than 1! how to install led bar AUXBEAM [ITA/ENG]

By | December 7, 2022

every self-respecting farmer has his car and then has the countryside car and sometimes he has the need to go to the countryside at night but in the countryside there are no street lights and artificial lights and sometimes the only lights of the car are not adequate therefore, Auxbeam came to our aid with the LED lights which I'll show you my brother wanted incredible lights and then arrived these two boxes, now we open and we look packed very well. Here is the little box with all the fixings. not just any light .. a big bar that will be placed there in front, on of the car snout thanks to Luca, an electrical repair that will make this video with me find out all the technical specifications in the video description. Also you will find the link for these bars, so you will see prices and offers.

But my brother was not satisfied and decided to put another bar behind smaller he needed because he could not see well by reverse gear He puts it back there let's start Luke takes the measure of the bar to put it in the center we fix the supports. As only Luke can do .. right? because if I do it myself ..

I only do damage with each bar, Auxbeam provides the switch Luca will show you how to mount it .. because I do not know where you put .. I suppose inside the car you have to be careful where you make the wires because there is an electric fan then there is the alternator belt all the hot pipes the wire should not be in your way during the event of assembly or disassembly of the various elements the car assemble the wiring connect the two terminals to the positive and the negative battery we find a way to push through the switch we must enlarge the hole actually everything that he does, I could do it too I do it to him just to make him a pleasure do not laugh! what are you doing? you have to bend the relay bracket to secure it here .. this is the fuse.

In the case that the power line is short circuit blowing the fuse instead of burning all the wires. all the wires were banded where it passes the thread switch put putty or silicone, to prevent water seepage Luke now, with all the patience of an electrician must install the smaller LED bar for passing the thread Luca, for the pleasure of my brother, he is taking apart the entire interior the car also for the rear bar is the same speech than the front.

The wires are passed in the same place and secured to the battery wiring. I'm becoming a practitioner.

As found on YouTube